Best Free Microsoft Updates and Microsoft Repair and Windows Updates

Below have been a beep codes for PHOENIX BIOS Q3.07 OR 4.X

Beep Code Description / What to Check
1-1-1-3 Verify Real Mode.
1-1-2-1 Get CPU type.
1-1-2-3 Initialize complement hardware.
1-1-3-1 Initialize chipset registers with primary POST values.
1-1-3-2 Set in POST flag.
1-1-3-3 Initialize CPU registers.
1-1-4-1 Initialize cache to primary POST values.
1-1-4-3 Initialize I/O.
1-2-1-1 Initialize Power Management.
1-2-1-2 Load swap registers with primary POST values.
1-2-1-3 Jump to UserPatch0.
1-2-2-1 Initialize set of keys controller.
1-2-2-3 BIOS ROM checksum.
1-2-3-1 8254 timer initialization.
1-2-3-3 8237 DMA controller initialization.
1-2-4-1 Reset Programmable Interrupt Controller.
1-3-1-1 Test DRAM refresh.
1-3-1-3 Test 8742 Keyboard Controller.
1-3-2-1 Set ES shred to register to 4 GB.
1-3-3-1 twenty-eight Autosize DRAM.
1-3-3-3 Clear 512K bottom RAM.
1-3-4-1 Test 512 bottom residence lines.
1-3-4-3 Test 512K bottom memory.
1-4-1-3 Test CPU bus-clock frequency.
1-4-2-4 Reinitialize a chipset.
1-4-3-1 Shadow complement BIOS ROM.
1-4-3-2 Reinitialize a cache.
1-4-3-3 Autosize cache.
1-4-4-1 Configure modernized chipset registers.
1-4-4-2 Load swap registers with CMOS values.
2-1-1-1 Set Initial CPU speed.
2-1-1-3 Initialize miscarry vectors.
2-1-2-1 Initialize BIOS interrupts.
2-1-2-3 Check ROM copyright notice.
2-1-2-4 Initialize physical education instructor for PCI Options ROMs.
2-1-3-1 Check video pattern opposite CMOS.
2-1-3-2 Initialize PCI train as well as devices.
2-1-3-3 Initialize all video adapters in system.
2-1-4-1 Shadow video BIOS ROM.
2-1-4-3 Display copyright notice.
2-2-1-1 Display CPU sort as well as speed.
2-2-1-3 Test keyboard.
2-2-2-1 Set pass click if enabled.
2-2-2-3 56 Enable keyboard.
2-2-3-1 Test for astonishing interrupts.
2-2-3-3 Display prompt Press F2 to come in SETUP.
2-2-4-1 Test RAM in between 512 as well as 640k.
2-3-1-1 Test stretched memory.
2-3-1-3 Test lengthened mental recall residence lines.
2-3-2-1 Jump to UserPatch1.
2-3-2-3 Configure modernized cache registers.
2-3-3-1 Enable outmost as well as CPU caches.
2-3-3-3 Display outmost cache size.
2-3-4-1 Display shade message.
2-3-4-3 Display non-disposable segments.
2-4-1-1 Display blunder messages.
2-4-1-3 Check for pattern errors.
2-4-2-1 Test real-time clock.
2-4-2-3 Check for set of keys errors
2-4-4-1 Set up hardware interrupts vectors.
2-4-4-3 Test coprocessor if present.
3-1-1-1 Disable onboard I/O ports.
3-1-1-3 Detect as well as implement outmost RS232 ports.
3-1-2-1 Detect as well as implement outmost together ports.
3-1-2-3 Re-initialize onboard I/O ports.
3-1-3-1 Initialize BIOS Data Area.
3-1-3-3 Initialize Extended BIOS Data Area.
3-1-4-1 Initialize floppy controller.
3-2-1-1 Initialize hard-disk controller.
3-2-1-2 Initialize local-bus hard-disk controller.
3-2-1-3 Jump to UserPatch2.
3-2-2-1 Disable A20 residence line.
3-2-2-3 Clear outrageous ES shred register.
3-2-3-1 Search for choice ROMs.
3-2-3-3 Shadow choice ROMs.
3-2-4-1 Set up Power Management.
3-2-4-3 Enable hardware interrupts.
3-3-1-1 Set time of day.
3-3-1-3 Check pass lock.
3-3-3-1 Erase F2 prompt.
3-3-3-3 Scan for F2 pass stroke.
3-3-4-1 Enter SETUP.
3-3-4-3 Clear in-POST flag.
3-4-1-1 Check for errors
3-4-1-3 POST done–prepare to foot handling system.
3-4-2-1 One beep.
3-4-2-3 Check cue (optional).
3-4-3-1 Clear tellurian descriptor table.
3-4-4-1 Clear relation checkers.
3-4-4-3 Clear shade (optional).
3-4-4-4 Check pathogen as well as backup reminders.
4-1-1-1 Try to foot with INT 19.
4-2-1-1 Interrupt handler error.
4-2-1-3 Unknown miscarry error.
4-2-2-1 Pending miscarry error.
4-2-2-3 Initialize choice ROM error.
4-2-3-1 Shutdown error.
4-2-3-3 Extended Block Move.
4-2-4-1 Shutdown 10 error.
4-3-1-3 Initialize a chipset.
4-3-1-4 Initialize modernise counter.
4-3-2-1 Check for Forced Flash.
4-3-2-2 Check HW standing of ROM.
4-3-2-3 BIOS ROM is OK.
4-3-2-4 Do a finish RAM test.
4-3-3-1 Do OEM initialization.
4-3-3-2 Initialize miscarry controller.
4-3-3-3 Read in bootstrap code.
4-3-3-4 Initialize all vectors.
4-3-4-1 Boot a Flash program.
4-3-4-2 Initialize a foot device.
4-3-4-3 Boot formula was review OK.

Article Source: レジストリクリーナー