INSERT SYSTEM DISK
Error Message:
INSERT SYSTEM DISK
Translation:
DOS blunder asking for disk.
Solution:
This only equates to we need to insert your bootable diskette in to the diskette drive.
INSUFFICIENT DISK SPACE
Error Message:
INSUFFICIENT DISK SPACE
Translation:
DOS blunder indicating we do not have sufficient room upon your tough hoop or diskette to finish a command.
Solution:
Use an additional diskette or undo a little files to have some-more space available.
How to Transfer A WINDOWS 95 System From One Hard Drive To Another
Step 1:
See http://www.computercraft.com/docs/dinst.shtml in a REFERENCE territory of COMPUTERCRAFT. Set a latest expostulate up as expostulate D:
Tip:If your motherboard has dual IDE connectors, afterwards implement a shortly to be D: expostulate as a SECONDARY MASTER. This way, we won’t have to fiddle with a jumpers upon possibly tough expostulate during all.
Step 2:
Either begin WINDOWS 95 in COMMAND LINE ONLY or close a complement down to MS DOS MODE. From a C: prompt run FDISK. In FDISK, name a second tough drive. In FDISK DON’T DO ANYTHING WITH THE PARTITION OF THE FIRST HARD DRIVE! THAT WILL DESTROY ALL THE DATA! Once you’ve comparison a second tough drive, afterwards acknowledgement a initial DOS partition. For simplicity, it’s insincere here which we will concede a assign to operate all accessible space. Exit FDISK as well as let a complement re-start.
Step 3:
In WINDOWS 95 open MY COMPUTER as well as name a latest (D:) tough drive. From FILE name FORMAT. Choose FULL as well as COPY SYSTEM FILES. After a format is complete, concede a complement to run SCANDISK with a THOROUGH option. If a latest tough expostulate shows any errors lapse it for a replacement! With today’s modernized expostulate technology, there is NO excusable turn of bad sectors!
Step 4:
From a START symbol name RUN. Type in xcopy C:\*.* /e /h /k /r /c D: as well as afterwards click OK. Depending upon a distance of your drive, this might take a prolonged time to complete.
Step 5:
If we do not already have one, go to ADD/REMOVE PROGRAMSin CONTROL PANEL as well as emanate a WINDOWS 95 STARTUP DISK. Test a STARTUP DISK to have certain which it is not an oxymoron – a STARTUP DISK which does not begin up!
Step 6:
Again following a directions in http://www.computercraft.com/docs/dinst.shtml Set a latest tough expostulate up as a C: drive. Remove a aged tough expostulate or set it up as a D: drive.
Step 7:
Boot a mechanism with a WINDOWS 95 STARTUP DISK. Run FDISK. Make a assign of a latest C: expostulate an ACTIVE partition. Exit FDISK. You should right away be means to begin WINDOWS 95 from a latest tough drive.
Hint:If we get a DRIVE IO ERROR when we try to begin a complement for a initial time, do not be concerned as well most only yet. Boot from a STARTUP DISK again. Run SYS C:. When we see SYSTEM TRANSFERRED, mislay a floppy. Try to foot from a bound hoop again. It’ll substantially be OK. If we still have a problem, stand in check with FDISK which a initial assign of a latest C: expostulate is tangible as ACTIVE. If it still won’t boot, as well as we have been certain which we followed all a directions correctly, unfortunately a tough expostulate is defective.
NON-SYSTEM DISK OR DISK ERROR. REPLACE AND STRIKE ANY KEY
Error Message:
NON-SYSTEM DISK OR DISK ERROR. REPLACE AND STRIKE ANY KEY
Translation:
DOS error: Before computers had tough drives, the handling complement was stored upon the diskette called the complement diskette, bootable diskette, or DOS disk. That diskette was kept in the A: drive, where the mechanism would demeanour for it when it was started.
While handling systems have been right away upon the tough drive, many computers still demeanour during the diskette expostulate prior to checking the tough drive. If they do not find anything in the A: drive, they check the tough drive, customarily the C: drive.
If, instead, they find the non-system diskette in the A: drive, you’ll get this message. The many usual reason for this summary is which we forgot to mislay the diskette from the A: expostulate when we final used it. Remove the diskette as well as set upon any pass to continue.
Another probability is which we have the mechanism (probably an aged one) which boots from the complement diskette. In which case, this summary equates to we need to put which diskette in the A: expostulate as well as continue.
Solution:
The final unfolding is the bit some-more serious. If conjunction of the upon top of situations relates to you, the initial step is to get the DOS complement diskette as well as try booting the mechanism from it. This should get we to an A> prompt. At the A> prompt, sort c: as well as press ENTER. If we get the C> prompt, the expostulate is using though your handling complement is lost; sort cd dos during the prompt as well as press ENTER, afterwards sort sys c: as well as press ENTER again.
That should reinstate the handling system. If, upon the alternative hand, we get the summary observant ��Invalid expostulate specification,�� when we try to switch to the C: drive, your tough expostulate is not operative properly. This is not the complaint we can repair yourself; you’ll need to have it serviced or replaced.
DISK FULL
Error Message:
DISK FULL
Translation:
DOS blunder – this summary appears during a duplicate operation, when a end diskette is full.
Solution:
Remove a little unneeded files from a diskette to have room for a full duplicate to fit, or operate an additional diskette.
Can we allot names to my DOS 3.3 diskettes?
DOS 3.3 has no approach to name a diskette “NARF”, “DISK 100″, “DATA DISK “, etc. that DOS will recognize. You can, however, ‘name’ a diskette by giving it a Volume Number in a operation 1-255.
Volume Number is set during a time a diskette is initialized. For example…
INIT HELLO, V19
INITs a diskette as Volume 19. If no series is specified, a default Volume Number used by INIT is 254.
Several DOS commands can mention a Volume Number in sequence to confirm either a diskette is a right a single for a little application.
LOAD NARF, D2, V5 … for example, will not bucket NARF from Drive 2 unless a diskette’s Volume Number is 5.
A couple of early pieces of blurb program used Volume numbering; and, newusers mostly similar to to Volume series their diskettes. In practice, this turns outto be a bad idea. A diskette with any Volume Number solely a default (254) isoften formidable to work with around customary utilities. Also, once a diskette isINITed for a sure Volume Number, becoming different a series is formidable becauseVolume Number is embedded in any Sector. (i.e. You’ll finish up carrying to duplicate each record to an additional diskette and, then, re-INITing a source diskette to a latest Volume Number.)
Besides, there’s an easy approach to give detailed names to your DOS 3.3 diskettes that will not interfer with normal access. Just write a name (“GAMES DISK ONE”, or whatever) to a Text record named, say, “DISK.ID”.
DOS 3.3 will not know about a name or uncover it in a CATALOG. However, your programs will be means to find out a name by only celebration of the mass DISK.ID.